Not logged in
NOTE: These kits are to be discontinued. When current inventory runs out that will be the last. No new Laser Cut kits will be produced. Only stick-built type kits.
The Passenger Station is based on a late 1800's C&O standard station design taken from actual C&O plans. Much effort has gone into reproducing the Passenger Station as close prototype as can be done in scale. Care to quality has been utmost in our minds. Our resin chimney casting does not contain lead so it is safe to handle. Care is taken to ensure all parts are free of defects both in manufacturing and in shipment. No additional castings are provided with the Station Kit.
This is a Craftsman Kit using 1/32" plywood sub-walls covered with 1/64" RC-Board engraved with detail. Stripwood is used for trim and the gingerbread is made of 1/32" plywood. RSSM laser cut 3-Tab shingles are used for roofing. The Platform consists of a interlaced framework of laser cut 1/32" plywood topped with an engraved plank sheet of 1/32" plywood. One could cover the top 1/32" plywood with their own 1x10 stripwood if they chose to.
Foot print of the Station building base is (S Scale) 32'-0" long by 16'-0" wide with the Bay Window protruding another 3'-0". The roof overhang foot print is 40'-0" long by 24'-0" wide. Real World building base dimensions are 7-3/8" long by 4-7/8".
Overall height of the Station building is 25'-0" (4-5/8") base to top of chimney. When on the Platform the height is 26'-6" (4-7/8") in height.The Platform dimensions are (S Scale) 48'-0" long by 40'-0" deep with the Real World dimensions of 9" long by 7-1/2" deep.
The Platform height (S Scale) 2'-9" ground to top with Real World height of 1/2".
Availabe in HO & O scales
Available in HO scale Only
Available in HO, S & O scales
Rusty Stumps Scale Models sold our laser cut detail products to www.rail-scale-models.com You can go to this website to purchase the Shingles, Door & Windows as well as the other such products we offered in the past.